1.25G/1.25G GEPON-OLT SFP 1490nm-TX/1310nm-Rx Class B+ DDM Module Transceivers
Item Specifications
Device Type | GEPON-OLT | Brand Name | Rollball |
Form type | GEPON SFP | Max Data Rate | 1.25/1.25Gb/s |
Max Cable Distance | 20km | Wavelength | 1490nm-TX/1310nm-Rx |
Cable Type | SMF | Connector Type | SC/UPC |
Receiver Sensitivity | <-28dBm | Operate Temperature | 0 to 70°C (32 to 158°F) |
Certificates | CE, ROHS,FCC, SGS | DDM Support | Yes |
Compatibility:
Our Products is compatible with all brands including Cisco, Juniper, HP, Extreme, Huawei, Nortel, H3C, 3COM, Alcatel-lucent, Foundry, D-Link, Ruijie, ZTE, ZyEXL, Brocade, Trendnet, BDCOM, Bitway, Telco etc.
Applications:
• FTTH
• Gigabit Ethernet Passive Optical Networks
Description:
• The GEPON OLT SFP transceiver is the high performance module for single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. It is optical line terminal(OLT) for ITU-T G984.2. The optical transceiver is compliant with the Small Form- Factor Pluggable (SFP) Multi-Source Agreement (MSA).
• The transmitter section uses a 1490nm DFB LD with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio over all operating temperature range. and is ClassⅠlaser compliant IEC825 and CDRH standards.The receiver has a hermetically packaged burst-mode APD-TIA (trans-impedance amplifier) pre-amplifier and a burst-mode limiting amplifier with LVPECL compatible differential outputs.
• The receiver also includes the function of burst mode signal detect output and fast RSSI output which is enabled by a trigger. When the burst optical power is on, the receiver outputs high level; when the burst optical power is off, the receiver outputs low level. Fast RSSI function can satisfy more severe timing demand to monitor the power from any ONU.